Bundle offer including a Lasius niger ant colony (queen + 5-10 workers + brood), a starter set Combi S with escape protection frame, grid insert 50mm, formicarium base – 20x20cm, clear drinking trough 20ml – sponge, a jar of our special Cricket Jam (moist protein) and a honeydew mix refill pack 10ml.
Only while stocks last.
Everything you need for a Lasius niger ant colony
This bundle contains everything you need to successfully get a Lasius niger colony through the first few months. It is flexibly expandable and explicitly suitable for beginners in ant keeping.
Ant species Lasius niger Lasius niger, also known as the “black trail ant”, is one of the most popular species for beginners in ant keeping. It is one of the small to medium-sized ants and is very frugal. It is widespread throughout Europe, but can also be found in Asia, Africa and North America.
Food for Lasius niger
In the wild, Lasius niger often keeps aphids in order to collect the honeydew produced from plant sap. In doing so, they protect them and even transport them to young shoots.
In the formicarium, you can simply place a few infested twigs (e.g. roses, elderberries, currants) in a vase and watch the animals milking them. In the formicarium it is best to give honey solution and protein food (either live small insects or dried protein food).
Hibernation in Lasius niger
Lasius niger hibernates between around the end of October and the end of March at 5-8 degrees. In the formicarium, you can simply place the entire formicarium in a cool room or (if the formicarium has a removable nest insert) place the nest insert in the refrigerator, for example. However, care should be taken to ensure that the ants are not exposed to temperatures below 0 degrees, as they are never as well protected from the cold in the formicarium as they are in the wild. There are also reports from keepers who keep Lasius niger without hibernation. However, this can lead to a shortened lifespan of the colony or slow down the development of the brood. During hibernation, the animals do not need to be fed or fed very little if necessary. However, you should check the humidity regularly and look out for mold!
Contents:
1x Lasius niger (queen + 5-10 workers + brood)
1x ant arena frame 20×20
1x grid insert 50 mm stainless steel
1x Cricket Jam 25g
1x honeydew honey 10ml refill pack
1x Formicarium base – 20x20cm
1x clear drinking trough 20ml – sponge
1x ANTCUBE – Arena 20x20x20 – Combi M
1x ant arena cover 20×20
4x fixing point for arena cover
2x Formicarium plugs for 27mm hole
1x formicarium plug for 50mm hole
1x substrate – sand-clay beige – 1000g
1x Drinking trough 2ml – 360 degrees
1x bowl clear 1×20 – sponge
1x Hand magnifier – 2x – 30mm
1x Tweezers plastic transparent
1x plastic pipette 3ml
1x Ant escape protection oil 10ml
1x foam wiper 150x18x2,5mm
Description:
This Starter Set – Combi is suitable for most ant species that nest in the ground.
The set is very compact and the accessories included have been reduced to the essentials.
It is therefore an inexpensive set made from high-quality materials, which is ideal for getting started with ant keeping.
The included substrate sand – clay beige is well accepted by most earth nest digging ant species.
However, other soil substrates or nesting inserts can also be placed in the nest area of the arena.
Further useful accessories can be found under the suggestions (see below).
Recommendation: We recommend a substrate layer of 2 mm in height so that the animals cannot dig into the arena and instead use the farm provided for this purpose. We also recommend that the nesting material in the farm (sand/clay, Digfix, etc.) is slightly pricked in one place to make it easier for the animals to dig.
Important: Please moisten the substrate before use so that the mixture can bind together and develop a firm hold in the ant farm. In addition, a dry and dusty substrate can lead to the ants’ airways being blocked and, in the worst case, the animals suffocating.
Note:
When using our nest inserts, please note that these are 8 mm narrower, as they were originally designed to fit our narrower ant farms and arena inserts! In this case, the space in between would have to be filled with filling material such as plaster or clay.
Notes on production
Glass is cut to size according to DIN 1249 with a tolerance of +/- 1mm. Additional escape protection is essential for extremely small ant species.
Instructions: (Version 2023, the updated version for 2024 will be available by 04/2024 at the latest)
– DE Gebrauchsanweisung Starter Set Combi (PDF 7,98 MB)
– EN Instructions for use – Starter Set Combi (PDF 7,94 MB)
– ES Manual de instrucciones – Set de inicio Combi (PDF 7,94 MB)
– FR Manuel d’instruction – Kit de démarrage Combi (PDF 7,95 MB)
Notes on the Cricket Jam:
Our Cricket Jam is an easy way to provide your ants with freshly preserved protein food without having to feed live insects. The contained crickets (Acheta domesticus) have been gently cooked to ensure that nutritional values, taste and aroma are preserved. In addition, the chitinous shell of the insects is softened in this way so that it can be digested more easily. The bonds of the collagen proteins are broken down so that the ants can utilize them better. Canned Acheta domesticus has the same nutritional value as live crickets, but is easier to digest.
The Cricket Jam is not suitable for hunting ant species that require live food. (e.g. ponerines (great ants) such as Harpegnathos or Odontomachus)
Further advantages:
Guaranteed mite-free
Can be portioned and diluted with water
Sterilized and vacuum-packed
Without additives
Crickets from sustainable, purely organic breeding, fed with organic waste
Note:
Can be kept in the fridge for about four days after opening. Longer shelf life if frozen.
Attention: First portion, then freeze.
Note on honeydew:
Content: 10 ml
This is a natural product that we have refined after extensive tests in our laboratory and developed into a food that is very well accepted by ants. The reason for this is that unprocessed honeydew honey in its concentrated original form is not well accepted by ants and their metabolism.
Our honeydew was collected in the unpolluted wild mountain forests of Bulgaria. Honeydew is only produced for a very limited time, about two months in summer. It is therefore very rare. Due to the specific soil characteristics of the forests and the climate, essential nutrients are stored in the leaves of the trees, which are absorbed by the aphids. This is what makes this honeydew mix so desirable for ants.
Application:
Amount of food should be consumed within about 3 days.
Description:
Honeydew, unlike flower honey, is obtained from secretions of insects that suck on plants, such as aphids. Honeydew is a popular food source for many insects such as ants, bees and bumblebees. Bees and bumblebees lick it from the leaves or needles of various trees. Ants such as Lasius niger literally keep the aphids. They even defend them against predators and carry them to fresh shoots.
Honeydew is particularly popular with ants because of its somewhat different components. The main sugars in honeydew are sucrose and fructose, but smaller amounts of maltose, trehalose, melezitose, raffinose and other oligosaccharides are also found. In addition to sugar and water, honeydew also contains essential amino acids, minerals, trace elements, adenosines, phosphates and other ingredients such as vitamins.
Use:
For honey-eating ant species (Meliphagidae)
This is a supplementary feed
It can be offered to the animals as supplied. As the sugar concentration is reduced by the humidity and a fermentation process begins, the food should be replaced every 3 days. Clean the feeding bowl/tube thoroughly before reuse.
Once opened, the pack should be kept tightly closed until the expiry date.
Nutritional information per 100 g:
approx. 2.7 % fats
of which saturated approx. 0.45 %
approx. 95 % carbohydrates
of which sugar approx. 71
approx. 2.85% protein
Minerals (potassium, calcium, copper, iron, sodium, magnesium, phosphorus, zinc and other trace elements) Amino acids (proline, leucine, phenylalanine, alanine, histidine, isoleucine, glutamic acid, arginine, aspartic acid, etc.) Organic acids Enzymes (enzymes)Flavorings Inhibins (antibacterial substances) Flowers Pollen
Storage:
To ensure the quality of the feed, the feed should be stored in a dark and dry place.
Note:
Supplementary feed for honey-eating ants.
Please refer to the package insert for composition, analytical ingredients, best-before date and batch number.
Information hotline +49 30 76687051
Responsible veterinary and food inspectorate:
Steglitz Veterinary Office
Königin-Luise-Str. 92
14195 Berlin
| Weight | 4,1140 kg |
|---|---|
| Dimensions | 34,00 × 7,50 × 21,00 cm |
Product safety
Manufacturer information
ANTSTORE, Martin Sebesta
Selerweg 41
D-12169 Berlin
Phone: +49 30 439 70 38 70
Email: law@ants.de
VAT ID No.: DE215167549
WEEE-Reg.-No. DE 54590387
Person responsible for the EU
ANTSTORE, Martin Sebesta
Selerweg 41
D-12169 Berlin
Phone: +49 30 439 70 38 70
Email: law@ants.de
VAT ID No.: DE215167549
WEEE-Reg.-No. DE 54590387
GPSR
Declaration of Conformity / GPSR Declaration EU (2023/988) for
- product: ANTCUBE Bundle Offer – Lasius niger
Brand: ANTCUBE
Item number: SKU1000563
Serial number:
Batch number:
- Authorized representative: Dealer or manufacturer
Name: ANTSTORE
Address: Selerweg 41; 12169 Berlin – Germany
Email: gpsr@ants.de
Website: www.antstore.de
Phone: (+49) 30 4397038-71
- This declaration is issued under the sole responsibility of the manufacturer/distributor.
GPSR / Product safety information.
Since 13.12.2024, we have been obliged to inform consumers about the safety and hazards of our products.
The manufacturer / distributor applied the conformity assessment procedure with internal production control. A notified body was not involved.
Additional information:
We hereby declare that the applicable provisions of the GPSR Regulation EU (2023/988)have been complied with in relation to the item shown to the extent indicated below.
We hereby declare that the technical documentation has been prepared in accordance with Directive 2023/988.
We undertake to provide the relevant information on the above partially completed point upon reasoned request from the competent national authorities. The transmission will be made by e-mail.
The technical documentation for the above items can be obtained from the authorized representative at the address below.
Warning: Not suitable for children under 14 years. Wear gloves. Beware of sharp edges, risk of cuts! Small parts: Risk of choking / suffocation. If necessary, wear a respirator mask and safety goggles when assembling or working. Adult supervision is recommended. Warning ! This is not a toy and offers no protection. Please keep this information for future reference. In the event of an accident, please go immediately to a doctor or hospital for medical treatment.
By complying with the GPSR, we actively contribute to product safety and consumer protection. Thank you for choosing high-quality and safe products!
We would also like to take this opportunity to point out the following:
Confirmation of compliance with the Supply Chain Due Diligence Act (LkSG):
Although this is not required by law, we would like to take this opportunity to expressly confirm that we comply with the guidelines of the German Supply Chain Duty of Care Act (LkSG).
We are committed to attaching particular importance to the following points within our supply chains:
- Human rights: Ensuring that fundamental human rights are respected and upheld along the entire supply chain.
- Environmental protection: Compliance with environmental standards to minimize negative ecological impacts.
- Due diligence obligations: Identifying, assessing and avoiding risks by continuously reviewing our supply chains.
- Cooperation with partners: Cooperation with suppliers and business partners to ensure compliance with these standards.
We consider the implementation of the LkSG guidelines to be a fundamental part of our corporate responsibility and will continue to take all necessary measures in the future to maintain the highest standards of due diligence.
For further information on our measures under the LkSG, please do not hesitate to contact us.
Our products consist of the following materials with packaging protection:
Float glass: All glass objects from ANTSTORE
Production / Distribution via: Scholl Glas / ANTSTORE
Warnings: Danger of cuts, it is recommended to wear gloves
CAS number. 65997173, EINECS No. 2660460
Technical property: Sodium calcium silicate glass 4 mm +/- 1 mm tolerance. Flammable from 1300 °C.
Care instructions: Not suitable for dishwashers: Please do not clean in the dishwasher, as the temperatures could cause the material to deform.
Risk assessment, probability of occurrence of possible damage: No risk if handled properly. Working with glass requires protective gloves. Formicaria and nests for keeping ants are intended exclusively for this purpose and must not be used for other purposes.
Cleanable with water and a soft cloth (microfiber).
Sustainability: 100% given, natural product. Dimensional stability over 20 years.
Repairability: Given. Please contact us.
Disposal: Can be recycled. Please contact your local authority / municipal waste management company for suitable recycling.
PC (polycarbonate), feed dispenser, water dispenser, cover plug
Production / Distribution via: ANTSTORE
Warnings: PC is not biodegradable and may contain harmful chemicals. Fire class B1 at approx. 230 °C .
CAS number: 25037-45-0
Technical properties:Are thermoplastics, formally consisting of polyester of carbonic acid. Transparent & colorless, but can be dyed as an alternative to glass. Moldable at approx. 180 degrees Celsius.
Risk assessment, probability of occurrence of possible damage: No risk if handled properly. Risk of ingestion by small children! Observe duty of supervision!
Care instructions: Only with microfiber cloth and water. Do not use alcohol or solvents.
Repairability: Can be bonded with reaction resin adhesives and is ultrasonic and high-frequency weldable. However, it is recommended in this context to have it carried out by an expert workshop.
Disposal: Waste / Recycling: The product must not be thrown into the normal waste garbage can and should not come into contact with the sewage system. Please contact your local authority / municipal waste management department for appropriate recycling.
PVC (polyvinyl chloride) – hoses, films, connectors
Production / Distribution via: ANTSTORE
Warnings: PVC is not biodegradable and may contain harmful chemicals. Fire class Cfl-s1 .Flammable at approx. 200 °C. Chlorides & dioxins are released.
CAS number: 9002-86-2
Technical property: Thermoplastic polymers. PVC plastics are divided into hard and soft PVC. Soft PVC, e.g. in hoses and films, contains plasticizers and additives.
Care instructions: With microfiber cloth and water. Do not use alcohol or solvents.
Risk assessment, probability of occurrence of possible damage: No risk if handled properly.
Repairability: Joints can be made using solvent-based adhesives, two-component adhesives or artificial welding (various manual and mechanical welding processes at approx. 180°C). However, it is recommended that this be carried out by a competent workshop.
Disposal: Waste / Recycling: The product must not be thrown into the normal waste garbage can and should not come into contact with the sewage system. Please contact your local authority / municipal waste management department for appropriate recycling.
PP polypropylene – syringes, water bottles, tubes, pipettes, petri dishes, collection boxes
Production / Distribution via: ANTSTORE
Warnings: Polypropylene is not biodegradable and may contain harmful chemicals. Fire class B1, flammable at approx. 260°C.
CAS number: 9003-07-0
Technical property: Polypropylene (PP) is a thermoplastic produced by chain polymerization of propene.
Risk assessment, probability of occurrence of possible damage: No risk if handled properly.
Care instructions: Only with microfiber cloth and water.
Repairability: unknown
Disposal: Waste / Recycling: The product must not be thrown into the normal waste garbage can and should not come into contact with the sewage system. Please contact your local authority / municipal waste management department for appropriate recycling.
PE – Polyethylene mailing bags e.g. for substrates, pipes, bottles, cable insulation, bubble wrap, cling film, carpet pad
Production / Distribution via: ANTSTORE
Warnings: Polyethylene is not biodegradable and may contain harmful chemicals. It burns without residue with a dripping, bright flame, even after the flame causing the fire has been removed. The exhaust gas smells similar to that of a wax candle flame. Fire class: The self-ignition temperature is 360°C.
Risk assessment, probability of occurrence of possible damage: No risk if handled properly.
CAS number: 9002-88-4
Technical property: is a thermoplastic produced by chain polymerization of mostly petrochemicals. Polyethylene is of low strength, hardness and rigidity, but has high ductility and impact strength. Polyethylene feels waxy to the touch and expands greatly when heated.
Care instructions: With microfiber cloth and water. Do not use alcohol or solvents.
Repairability: unknown
Disposal: Waste / Recycling: The product must not be thrown into the normal waste garbage can and should not come into contact with the sewage system. Please contact your local authority / municipal waste management department for appropriate recycling.
PS (polystyrene) – Expanded polystyrene (EPS) – Styrofoam – Shipping protection corners or thermal insulation box
Production / distribution via: Storopack / ANTSTORE
Warnings: EPS is not biodegradable and may contain harmful chemicals. Fire class B1, flammable at approx. 230 °C.
CAS number: 9003-53-6
Risk assessment, probability of occurrence of possible damage: No risk if handled properly.
Technical properties: Solid, thermoplastic material with the highest insulation value and low weight.
Care instructions: Primarily for packaging protection purposes.
Repairability: adhesive tape.
Disposal: Waste / Recycling: The product must not be thrown into the normal waste garbage can and should not come into contact with the sewage system. Please contact your local authority / municipal waste management department for appropriate recycling.
Silicone – Synthetic polymers (dried)
Production / Distribution via: ANTSTORE
Warning notices: Observe eye, nose and hand protection when working. Processing temperature from 5 °C to 40 °C.
Flammable: At approx. 150 °C .
CAS number: 63394-02-5
Risk assessment, probability of occurrence of possible damage: No risk if handled properly.
Technical property: Silicone fluids are clear, colorless, neutral, odorless, hydrophobic liquids. Lubricating.
Care instructions: Silicone fluids are soluble in benzene, toluene, aliphatics and chlorinated hydrocarbons. They are not very resistant to strong inorganic acids and bases.
Disposal: Waste / Recycling: The product must not be thrown into the normal waste garbage can and should not come into contact with the sewage system. Please contact your local authority / municipal waste management department for appropriate recycling.
Paper / Cardboard – Packaging
Production / Distribution via: ANTSTORE
Warning notices: Both paper and cardboard boxes can have sharp edges. Gloves offer sufficient protection when handling the material. Highly flammable.
Risk assessment, probability of occurrence of possible damage: No risk if handled properly.
Technical property: Solid 
Disposal: Waste / Recycling: Can be reused. It is also naturally degradable or compostable. Please contact your local authority / municipal waste management for suitable recycling.
Paraffin oil: Breakout protection oil
Production / Distribution via: ANTSTORE
Warnings: May be fatal if swallowed and enters airways. May cause eye and skin irritation. In such cases, seek urgent medical advice.
CAS No.: 8042-47-5
Risk assessment, probability of occurrence of possible damage: No risk if handled properly.
Technical property: Liquid polymers.
Care instructions: Can be wiped clean with a microfiber cloth.
Disposal: Waste / Recycling: The product must not be thrown into the normal waste garbage can and should not come into contact with the sewage system. Please contact your local authority / municipal waste management department for appropriate recycling.
Stainless steel / mesh insert , spring steel tweezers
Production / Distribution via: ANTSTORE
Warnings: Risk of cuts and punctures, risk of swallowing small parts if handled incorrectly.
CAS number: 65997-19-5
Care instructions: Can be cleaned with a microfiber cloth.
Disposal: Waste / Recycling: The product can be reused. It is therefore recyclable. Please contact your local authority / municipal waste management company for suitable recycling.
Responsibly signed for and on behalf of: ANTSTORE
Contact: www.antstore.net / www.antcube.shop
Place of issue: Selerweg 41; 12169 Berlin
Berlin / Germany
Date of issue: December 12, 2024
Name: Martin Sebesta
Position: Business owner / managing director
Signature: 
1 review for Bundle Offer – Lasius niger
Only logged in customers who have purchased this product may leave a review.
Related Products
Bundle offers - Starter sets with ants
incl. VAT
plus Shipping Costs
Delivery time: Germany 1-3 workdays
willi –
Sind nach 2 Tagen angekommen. Alles passt.
Verified purchase. Find out more