Spacer for 20mm tube

Product dimensions: 49x14x8mm (spacer)

Material: acrylic glass, spring steel

Color: white, steel grey

Content:
1x spacer
1x clamp holder – spring steel for 20mm
2x screw and dowel for wall mounting
1x small screw for fixing the clamp holder to the spacer

Description:
Spacers for attaching acrylic tubes to the wall. These were developed to connect our wall arenas and wall ant farms to each other or to other elements via acrylic tubes. This bridges the gap between the wall and acrylic tubes and enables the acrylic tubes to be fixed securely, firmly and visually attractive with clamp holders.

Note:
Supplied in individual parts and must be attached using a Phillips screwdriver
There are thin protective films on both sides of the spacer. Simply peel these off.

Fastening:
To fix the 2 “S6” wall plugs in the wall, you need a drill with a 6mm drill bit (wood, stone or metal depending on the material).
Holes 40mm deep must be drilled into the wall in order to countersink the 6x30mm dowels with the 4.5x40mm screws.
Required for assembly:
– Spirit level
– Adhesive tape so that you do not have to mark the wall below.
– Phillips screwdriver
– Drill/driver depending on the wall
– 6mm drill bit (wood, stone or metal depending on the surface)