ANTCUBE Starter Set L – 20×20 – Cork
199,90 €
incl. VAT plus Shipping Costs
The set consists of 25 parts and is suited for many ant species, especially those that nest in dead wood.
Size: L
Out of stock
Contents:
1x ANTCUBE – Arena 20x20x10 – flat
1x Ant arena frame 20×20
1x ant arena cover 20×20
4x fixing point for arena cover
1x ANTCUBE – Ant farm – L – 20×20 – upright
1x ANTCUBE – cork nest 20×20 – upright
1x 0,5m hose transparent 20/16 mm
1x ANTCUBE – Red foil 20×20 – filter
1x adhesive clips – transparent 2 pcs.
1x substrate – sand-clay beige – 1000g
2x Grid insert acrylic – 50 mm with sealing ring
1x Grid insert acrylic – 27 mm with sealing ring
1x Grid cap – 16mm – stainless steel
1x tank hose connector 27-14,16,20 mm – transparent
1x Ant escape protection oil 10ml
1x Tweezers spring steel – wide – soft
1x Tweezers plastic transparent
1x Plastic pipette 3ml
1x hand magnifier – 2x – 30mm
1x foam wiper 150x18x2.5mm
1x drinking clear 5ml – sponge
1x Feeding dish white rectangle – 3 compartments
1x Drinking trough 2ml – 360 Degrees
1x Foil thermometer – farm
1x Foil thermometer display
Description:
This starter set made of cork, with pre-built tunnels and chambers, is suitable for various ant species, especially those that nest in dead wood.
The “ANTCUBE – Cork Nest” can be inserted into the fully transparent farm. Alternatively, however, the “Sand-clay beige” substrate can also be used to fill the farm or to close off some of the chambers of the cork nest. Additional modules can be connected via the 50 mm holes in the cover if required, e.g. the separately available foggers, fans or lights. Alternatively, suitable grid inserts and formicarium plugs to close the openings are included in the scope of delivery. If desired, the formicarium can also be operated open by simply placing the removable frame on top and applying the ant escape protection oil to the edge. The “Drinking trough 2ml – 360 degrees” is intended for honey/sugar solution, the “Drinking trough clear 5ml – sponge” for water. The “Foil thermometer display” can be attached to the frame or the cover and displays the climate values.
Important: Please moisten the substrate before use so that the mixture can bind and develop a firm hold in the ant farm. In addition, if the substrate is too dry and dusty, the ants’ airways may be blocked and, in the worst case, the animals may suffocate.
Recommendation: We recommend a substrate layer of 2 mm in height so that the animals cannot burrow into the arena and instead use the farm provided for this purpose.
Notes on production
The glass is cut to size according to DIN 1249 with a tolerance of +/- 1 mm. Additional escape protection is essential for extremely small ant species.
Notes on the farm
The nest should only be used in a dry formicarium. If the nest is kept permanently moist, the material may become moldy.
Please note the following when attaching or removing hoses:
If the tubing is very difficult to fit onto the connection socket, the socket should be lightly rubbed with a drop of our anti-burst oil or powder. The hose should then be pushed onto the socket using twisting or screwing movements without straining the socket with up and down movements. The same applies when removing the hoses from the farm connection socket. Please do not simply pull it off!
Instructions:
– EN Instructions for use – Starter Set Cork (PDF 3.79 MB)
– ES Manual de instrucciones – Set de inicio de corcho (PDF 3,79 MB)
– FR Manuel d’instruction – Kit de démarrage en liège (PDF 3,79 MB)
| Weight | 3,9000 kg |
|---|---|
| Dimensions | 0,00 × 0,00 × 0,00 cm |
Product safety
Manufacturer information
ANTSTORE, Martin Sebesta
Selerweg 41
D-12169 Berlin
Phone: +49 30 439 70 38 70
Email: law@ants.de
VAT ID No.: DE215167549
WEEE-Reg.-No. DE 54590387
Person responsible for the EU
ANTSTORE, Martin Sebesta
Selerweg 41
D-12169 Berlin
Phone: +49 30 439 70 38 70
Email: law@ants.de
VAT ID No.: DE215167549
WEEE-Reg.-No. DE 54590387
GPSR
Declaration of Conformity / GPSR Declaration EU (2023/988) for
- Product: ANTCUBE Starter Set L – 20×20 – Cork
Brand: ANTCUBE
Item number: SKU1005508
Serial number:
Batch number:
- Authorized representative: Dealer or manufacturer
Name: ANTSTORE
Address: Selerweg 41; 12169 Berlin – Germany
Email: gpsr@ants.de
Website: www.antstore.de
Phone: (+49) 30 4397038-71
- This declaration is issued under the sole responsibility of the manufacturer/distributor.
GPSR / Product safety information.
Since 13.12.2024, we have been obliged to inform consumers about the safety and hazards of our products.
The manufacturer / distributor applied the conformity assessment procedure with internal production control. A notified body was not involved.
Additional information:
We hereby declare that the applicable provisions of the GPSR Regulation EU (2023/988) have been complied with in relation to the item shown to the extent indicated below.
We hereby declare that the technical documentation has been prepared in accordance with Directive 2023/988.
We undertake to provide the relevant information on the above partially completed point upon reasoned request from the competent national authorities. The transmission will be made by e-mail.
The technical documentation for the above items can be obtained from the authorized representative at the address below.
Warning: Not suitable for children under 14 years. Wear gloves. Beware of sharp edges, risk of cuts! Small parts: Risk of choking / suffocation. If necessary, wear a respirator mask and safety goggles when assembling or working. Adult supervision is recommended. Warning ! This is not a toy and offers no protection. Please keep this information for future reference. In the event of an accident, please go to a doctor or hospital immediately for medical treatment.
By complying with the GPSR, we actively contribute to product safety and consumer protection. Thank you for choosing high-quality and safe products!
We would also like to take this opportunity to point out the following:
Confirmation of compliance with the Supply Chain Due Diligence Act (LkSG):
Although this is not required by law, we would like to take this opportunity to expressly confirm that we comply with the guidelines of the German Supply Chain Duty of Care Act (LkSG).
We are committed to attaching particular importance to the following points within our supply chains:
- Human rights: Ensuring that fundamental human rights are respected and upheld along the entire supply chain.
- Environmental protection: Compliance with environmental standards to minimize negative ecological impacts.
- Due diligence obligations: Identifying, assessing and avoiding risks by continuously reviewing our supply chains.
- Cooperation with partners: Cooperation with suppliers and business partners to ensure compliance with these standards.
We consider the implementation of the LkSG guidelines to be a fundamental part of our corporate responsibility and will continue to take all necessary measures in the future to maintain the highest standards of due diligence.
For further information on our measures under the LkSG, please do not hesitate to contact us.
Our products consist of the following materials with packaging protection:
Float glass: All glass objects from ANTSTORE
Production / Distribution via: Scholl Glass / ANTSTORE
Warnings: Danger of cuts, it is recommended to wear gloves
CAS number. 65997173, EINECS No. 2660460
Technical property: Sodium calcium silicate glass 4 mm +/- 1 mm tolerance. Flammable from 1300 °C.
Care instructions: Not suitable for dishwashers: Please do not clean in the dishwasher, as the temperatures could cause the material to deform.
Risk assessment, probability of occurrence of possible damage: No risk if handled properly. Working with glass requires protective gloves. Formicaria and nests for keeping ants are intended exclusively for this purpose and must not be used for other purposes.
Cleanable with water and a soft cloth (microfiber).
Sustainability: 100% given, natural product. Dimensional stability over 20 years.
Repairability: Given. Please contact us.
Disposal: Can be recycled. Please contact your local authority / municipal waste management company for suitable recycling.
PMMA (acrylic glass) connection sockets , Transparent basin connectors
Production / Distribution via: ANTSTORE
Warning: Can be machined. Beware of sharp edges, risk of cutting.
Combustible at temperatures above 400°C. Fire class B2. PPMA continues to burn, forms droplets and has a sweet smell.
Cas number: 9011-14-17
Technical property: Polymethyl methacrylate (PMMA, also known as acrylic glass) is a transparent thermoplastic.) PMMA is plastically deformable above 100 °C and this deformation is thermally reversible. Alternative to glass.
Water absorption: 0.3 % in dry air
1.2 % in humid air
2.0 % in moist water storage
Risk assessment, probability of occurrence of possible damage: No risk if handled properly.
Care instructions: With microfiber cloth and water. Do not use alcohol or solvents.
Repairability: Given. Connections by gluing or welding are possible.
Waste / recycling: PMMA is not biodegradable as it is weather-resistant. The product must not be thrown into the normal waste garbage can and should not come into contact with the sewage system. Please contact your local authority/ municipal waste management department for suitable recycling.
PC (polycarbonate), feed dispenser, water dispenser, cover plug
Production / Distribution via: ANTSTORE
Warnings: PC is not biodegradable and may contain harmful chemicals. Fire class B1 at approx. 230 °C .
CAS number: 25037-45-0
Technical properties:Are thermoplastics, formally consisting of polyester of carbonic acid. Transparent & colorless, but can be dyed as an alternative to glass. Moldable at approx. 180 degrees Celsius.
Risk assessment, probability of occurrence of possible damage: No risk if handled properly. Risk of ingestion by small children! Observe duty of supervision!
Care instructions: Only with microfiber cloth and water. Do not use alcohol or solvents.
Repairability: Can be bonded with reaction resin adhesives and is ultrasonic and high-frequency weldable. However, it is recommended in this context to have it carried out by an expert workshop.
Disposal: Waste / Recycling: The product must not be thrown into the normal waste garbage can and should not come into contact with the sewage system. Please contact your local authority / municipal waste management department for appropriate recycling.
PVC (polyvinyl chloride) – hoses, films, connectors
Production / Distribution via: ANTSTORE
Warnings: PVC is not biodegradable and may contain harmful chemicals. Fire class Cfl-s1 .Flammable at approx. 200 °C. Chlorides & dioxins are released.
CAS number: 9002-86-2
Technical property: Thermoplastic polymers. PVC plastics are divided into hard and soft PVC. Soft PVC, e.g. in hoses and films, contains plasticizers and additives.
Care instructions: With microfiber cloth and water. Do not use alcohol or solvents.
Risk assessment, probability of occurrence of possible damage: No risk if handled properly.
Repairability: Joints can be made using solvent-based adhesives, two-component adhesives or artificial welding (various manual and mechanical welding processes at approx. 180°C). However, it is recommended that this be carried out by a competent workshop.
Disposal: Waste / Recycling: The product must not be thrown into the normal waste garbage can and should not come into contact with the sewage system. Please contact your local authority / municipal waste management department for appropriate recycling.
PP polypropylene – syringes, water bottles, tubes, pipettes, petri dishes, collection boxes
Production / Distribution via: ANTSTORE
Warnings: Polypropylene is not biodegradable and may contain harmful chemicals. Fire class B1, flammable at approx. 260°C.
CAS number: 9003-07-0
Technical property: Polypropylene (PP) is a thermoplastic produced by chain polymerization of propene.
Risk assessment, probability of occurrence of possible damage: No risk if handled properly.
Care instructions: Only with microfiber cloth and water.
Repairability: unknown
Disposal: Waste / Recycling: The product must not be thrown into the normal waste garbage can and should not come into contact with the sewage system. Please contact your local authority / municipal waste management department for appropriate recycling.
PE – Polyethylene mailing bags e.g. for substrates, pipes, bottles, cable insulation, bubble wrap, cling film
Production / Distribution via: ANTSTORE
Warnings: Polyethylene is not biodegradable and may contain harmful chemicals. It burns without residue with a dripping, bright flame, even after the flame causing the fire has been removed. The exhaust gas smells similar to that of a wax candle flame. Fire class: The self-ignition temperature is 360°C.
Risk assessment, probability of occurrence of possible damage: No risk if handled properly.
CAS number: 9002-88-4
Technical property: is a thermoplastic produced by chain polymerization of mostly petrochemicals. Polyethylene is of low strength, hardness and rigidity, but has high ductility and impact strength. Polyethylene feels waxy to the touch and expands greatly when heated.
Care instructions: With microfiber cloth and water. Do not use alcohol or solvents.
Repairability: unknown
Disposal: Waste / Recycling: The product must not be thrown into the normal waste garbage can and should not come into contact with the sewage system. Please contact your local authority / municipal waste management department for appropriate recycling.
PS (polystyrene) – Expanded polystyrene (EPS) – Styrofoam – Shipping protection corners or thermal insulation box
Production / distribution via: Storopack / ANTSTORE
Warnings: EPS is not biodegradable and may contain harmful chemicals. Fire class B1, flammable at approx. 230 °C.
CAS number: 9003-53-6
Risk assessment, probability of occurrence of possible damage: No risk if handled properly.
Technical property: Solid, thermoplastic material with the highest insulation value and light weight.
Care instructions: Primarily for packaging protection purposes.
Repairability: adhesive tape.
Disposal: Waste / Recycling: The product must not be disposed of in the normal waste garbage can and should not come into contact with the sewage system. Please contact your local authority / municipal waste management department for appropriate recycling.
Silicone – Synthetic polymers (dried)
Production / Distribution via: ANTSTORE
Warning notices: Observe eye, nose and hand protection when working. Processing temperature from 5 °C to 40 °C.
Flammable: At approx. 150 °C .
CAS number:
Risk assessment, probability of occurrence of possible damage: No risk if handled properly.
Technical property: Silicone fluids are clear, colorless, neutral, odorless, hydrophobic liquids. Lubricating.
Care instructions: Silicone fluids are soluble in benzene, toluene, aliphatics and chlorinated hydrocarbons. They are not very resistant to strong inorganic acids and bases.
Disposal: Waste / Recycling: The product must not be thrown into the normal waste garbage can and should not come into contact with the sewage system. Please contact your local authority / municipal waste management department for appropriate recycling.
Paper / Cardboard – Packaging
Production / Distribution via: ANTSTORE
Warning notices: Both paper and cardboard boxes can have sharp edges. Gloves offer sufficient protection when handling the material. Highly flammable.
Risk assessment, probability of occurrence of possible damage: No risk if handled properly.
Technical property: Solid 
Disposal: Waste / Recycling: Can be reused. It is also naturally degradable or compostable. Please contact your local authority / municipal waste management for suitable recycling.
Paraffin oil: Breakout protection oil
Production / Distribution via: ANTSTORE
Warnings: May be fatal if swallowed and enters airways. May cause eye and skin irritation. In such cases, seek urgent medical advice.
CAS No.: 8042-47-5
Risk assessment, probability of occurrence of possible damage: No risk if handled properly.
Technical property: Liquid polymers.
Care instructions: Can be wiped clean with a microfiber cloth.
Disposal: Waste / Recycling: The product must not be thrown into the normal waste garbage can and should not come into contact with the sewage system. Please contact your local authority / municipal waste management department for appropriate recycling.
Natural cork nest insert
Production / Distribution via: ANTSTORE
Color deviations possible: It is possible that the actual colors of the ant nest may differ slightly from the colors shown in the pictures, also due to UV light exposure over a longer period of time.
Warnings: Cork is not biodegradable and may contain harmful chemicals. Fire class: B2. Combustible at approx. 230 °C.
CAS number: 61789-98-8
Risk assessment, probability of occurrence of possible damage: No risk if handled properly.
Technical property: Insulating. Insulating natural material. Must not be moistened as there is a risk of mold and expansion.
Disposal: Waste / Recycling: The product must not be thrown into the normal waste garbage can. Please contact your local authority / municipal waste management company for suitable recycling.
Stainless steel / mesh insert , spring steel tweezers
Production / Distribution via: ANTSTORE
Warnings: Cut and puncture hazard, risk of swallowing small parts if handled incorrectly.
CAS number: 65997-19-5
Care instructions: Can be cleaned with a microfiber cloth.
Disposal: Waste / Recycling: The product can be reused. It is therefore recyclable. Please contact your local authority / municipal waste management department for suitable recycling.
Responsibly signed for and on behalf of: ANTSTORE
Contact: www.antstore.net / www.antcube.shop
Location of the exhibition: Selerweg 41; 12169 Berlin
Berlin / Germany
Date of issue: December 12, 2024
Name: Martin Sebesta
Position: Owner / Managing Director
Signature: 
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.