ANTCUBE – Ant farm – M – 30×30 – wall

Dimensions (LxH): 
Outside: 32.5 x 32.5 cm / Inside: 29.2 x 29.2 cm

Material:
Float glass, wood, PMMA

Color:
crystal clear, white

Content:
1x Ant farm 10mm plate spacing with wall mounting.
1x cover
1x wooden frame white painted with magnet lock
2x spacer bars for nest inserts
6x screws and dowels (for wood / stone wall)

connection:
2x 8/10 x 10mm socket

Description:
These ant farms are designed for wall mounting and can be easily mounted on wood and stone walls.
The frame is made of real natural wood, with a white paint finish in a modern, timeless design.
This frame can be removed to open the farm and can be reattached to the farm via a magnetic holder.

Mounting instructions:
To attach the 6 dowels “S6” in the wall you need a drill with a 6mm drill bit (wood or stone depending on the material).
Holes 40mm deep must be drilled in the wall to countersink the dowels with the 4x30mm screws.

Notes on production
The glass is cut according to DIN 1249 with a tolerance of +/- 1mm. For extremely small ant species an additional breakout protection is essential.

Note on the farm
When attaching or removing hoses, please note the following:
If the tubing is very difficult to fit onto the connector bushing, the bushing should be lightly rubbed with a drop of our breakout protection oil or powder. The hose should then be pushed onto the bushing by twisting or screwing movements, without stressing the bushing with up and down movements. The same applies when removing the hoses from the connection bushing of the farm. Please do not simply pull off!