ANTCUBE – Nest 30×30 – lying

치수:
Nest: 290 x 290 x 28 mm
Glass cover: 290 x 290 x 4 mm

Material:
플로트 유리, 플라스틱

색상:
수정처럼 맑은

콘텐츠:
1x ANTCUBE – Nest 30×30 – horizontal with two connection sockets L 20/16
1x glass cover with 27mm hole

연결: 14/16/18/20 x 20mm 소켓 2개

14/10 hose is inserted tightly into the 14mm socket
20/16 hose is inserted tightly into the first 16mm step
22/18 hose is inserted tightly into the second 20mm step

설명: Our horizontal nest has two connection sockets to which hoses or tubes can be attached. Alternatively, these can be securely closed with matching plastic or mesh caps.

For larger ant species, such as various Camponotus species, we recommend combining it with one of our separately available cork nests. However, the nest can also be filled with substrate.

The cover is easy to remove and fits securely on the ant farm thanks to its rubberized edge. In the middle is a 27 mm hole, which is used to moisten the inside of the nest. Depending on the desired humidity, this opening can be closed with either a mesh insert or a formicarium plug.

A red cover is available as an option, which darkens the nest and, depending on the species kept, can have a positive effect on the development of the colony.

Manufacturing information
The glass is cut in accordance with DIN 1249 with a tolerance of +/- 1 mm. Additional break-out protection is essential for extremely small ant species.

연결 소켓에 대한 참고 사항
호스를 부착하거나 제거할 때 다음 사항에 유의하세요:
If the hose is very difficult to fit onto the connection socket, the socket should be lightly rubbed with a drop of our breakout protection oil or powder. The hose should then be pushed onto the connector by turning or screwing it, without applying upward or downward pressure to the connector. The same applies when removing the hoses from the connector. Please do not simply pull them off!